What is the difference between Johnson Controls VG7000 and VG1800 (VG18) series valves?

VG7000 Series are globe valves: they use a linear stem and plug to regulate flow. Globe valves provide very good flow control linearity and are used where close modulation is required. They are available 1/2 to 2 inch, with bronze or stainless steel trim, and pair with VA7800 Series electric actuators. VG1800/VG12 Series are ball valves: they use a rotating ball with a port through it to control flow. Ball valves have much higher Cv flow factors for the same pipe size — less pressure drop at the same flow rate. They are available from 1/2 to 6 inch in threaded, sweat, and ASME Class 150 flanged end connections, and pair with M9000 Series rotary actuators (M9104, M9203, M9208, M9220). Choose globe valves where close modulation and exact flow control matter; choose ball valves where low pressure drop and high flow capacity are priorities or where pipe sizes exceed 2 inches.

What is the difference between spring return and non-spring return Johnson Controls actuators?

Spring return (SR) actuators use an internal spring that drives the valve or damper to a defined fail-safe position (fully open or fully closed) when power is removed. This is essential for freeze protection systems (valve must open on power loss), smoke control dampers (damper must close or open on power loss), and any application where a defined fail position is required by code or engineering design. Non-spring return (NSR) actuators hold their last position when power is removed — they do not have a spring. Used in general modulating control where the fail position does not matter. For Johnson Controls VA7800 Series actuators on VG7000 valves: spring return models are VA7820 (small valves) and VA7840 (large valves); non-spring return are VA7810 and VA7830. For M9000 Series on ball valves and dampers: spring return models include M9203, M9208, and M9220; non-spring return include M9104 and M9300. All can be field configured for on/off, floating, or proportional (0-10V) control via DIP switches.

What is the Johnson Controls TE-6300 temperature sensor and what systems is it compatible with?

The Johnson Controls TE-6300 Series are passive temperature sensing elements using a 1,000 ohm nickel RTD sensing element, designed for building automation and HVAC applications. The nickel RTD provides stable, robust, long-service-life temperature sensing with a predictable resistance-temperature curve. Available in duct insertion (TE-6310, TE-6320), pipe or well mount (TE-6328), strap-on surface mount (TE-6300-603), and outside air temperature configurations (TE-6100). They are fully compatible with the Johnson Controls Metasys building automation system and with any BAS controller, thermostat, or transmitter that accepts a 1,000 ohm nickel RTD input. The TE-6328P-1 (pipe/well mount, 20-foot lead, 1,000 ohm nickel RTD) is one of the most commonly ordered models. Call (901) 458-2000 with your BAS controller model and we will confirm compatibility.

Johnson Controls · PENN Controls · Founded 1885 · Milwaukee, WI · NYSE: JCI · Commercial Building Automation

Johnson Controls —
Commercial HVAC Valves, Actuators, Temperature Controllers & Sensors

Memphis Control Center stocks Johnson Controls commercial HVAC controls — the most widely installed building automation components in the industry. A19 Series temperature controllers (-30°F to 550°F, SPST/SPDT, remote bulb, strap-on, direct immersion). VG7000 Series globe valves (1/2" to 2", bronze/brass/stainless, 2-way and 3-way, with VA7800 electric actuators). VG1800 Series ball valves (1/2" to 6", 2-way and 3-way, threaded and flanged). M9000/M9104/M9208/M9220 electric actuators (spring return and non-spring return, on/off, floating, and proportional). TE-6300/TE-6000 Series temperature sensors (1000 Ω nickel RTD, duct, pipe, outside air, room). P32/P100 pressure switches. Family-owned, serving Memphis since 1967.

Browse All Johnson Controls Products Call (901) 458-2000

A19/PENN Temperature Controllers VG7000/VG1800 Control Valves M9000/M9104/M9208 Actuators TE-6300 Sensors · P32/P100 Pressure Family-Owned Since 1967

The Original Thermostat CompanyWarren Johnson invented the first electric room thermostat in 1883 and founded Johnson Controls in 1885 — the company that launched the building controls industry. JCI products are now in hundreds of millions of buildings worldwide

Broadest JCI Selection in the Mid-SouthMemphis Control Center stocks one of the broadest Johnson Controls selections in the Mid-South — valves, actuators, temperature controls, sensors, pressure switches, and pneumatic controls from the full JCI catalog

Commercial Building Automation FocusJCI sold its residential/light commercial HVAC business to Bosch in August 2025 — the parts we stock are all commercial building automation controls, unaffected by that transaction. Same products, same JCI engineering

Same-Day ShippingJohnson Controls parts ship same day from Memphis, TN — free. Call (901) 458-2000 with your JCI part number and we will confirm availability and ship today

️

Johnson Controls — the company that invented the thermostat. In 1883, Warren S. Johnson, a professor at the State Normal School in Whitewater, Wisconsin, was frustrated that a janitor had to interrupt class every hour to check temperatures and adjust basement furnace dampers. He spent three years in his private laboratory developing a solution, and in 1883 received his first US patent for the "electric tele-thermoscope" — what became known as the first electric room thermostat. It used a sealed bimetal element and a small mercury reservoir: temperature changes moved the bimetal into and out of the mercury pool to close or open an electrical circuit. In 1885, Johnson partnered with Milwaukee businessman William Plankinton to found the Johnson Electric Service Company in Milwaukee, Wisconsin. He went on to develop the first automatic multi-zone pneumatic temperature control system — a pneumatic thermostat controlling air flow through a nozzle to operate steam or hot water valves. The company became Johnson Service Company in 1902, and grew across the 20th century through acquisitions and expansions in building controls, automotive, and facility management. Major milestones: the 2005 acquisition of York International HVAC equipment; the 2016 merger with Tyco International (fire and security systems); and the August 1, 2025 completion of the sale of its Residential and Light Commercial HVAC business to Bosch for $8.1 billion — making JCI a focused, pure-play commercial building solutions company. Today, Johnson Controls (NYSE: JCI) is headquartered in Cork, Ireland, with operations in over 150 countries and approximately 87,000 employees. Its building automation and HVAC controls — the Metasys BAS platform, VG-series valves, A19 controllers, M9000 actuators, and TE-series sensors — are the industry standard in commercial buildings worldwide.

Johnson Controls Product Lines at Memphis Control Center

The most commonly ordered Johnson Controls product families at Memphis Control Center — covering temperature controls, control valves, electric actuators, temperature sensors, and pressure switches for commercial HVAC and building automation applications. Contact us or call (901) 458-2000 with your JCI part number.

A19 Series A19 Temperature Controllers — Line Voltage, Remote Bulb, Strap-on, Immersion

The Johnson Controls A19 Series — sold under the PENN Controls sub-brand within the Johnson Controls portfolio — is one of the most widely used mechanical temperature controllers in HVAC and industrial applications. It uses a liquid-filled sensing element and capillary to actuate SPST or SPDT line-voltage contacts across a broad temperature range (-30°F to 550°F depending on model). Available in remote bulb, strap-on surface mount, direct immersion, coiled bulb space, and averaging configurations. Auto reset (standard) and manual reset (lockout) versions. Key model families: A19AAC/A19ADB (hot water, 100–240°F), A19BAC/A19BBC (refrigeration/cooling, -30°F to 95°F), A19ADB-26 (40–120°F manual reset, 1.8m capillary), A19AUC (100–250°F, 10' capillary). Applications: hot water temperature cutout, freeze protection, crop drying, warm air heating, process temperature control.

Series	Range	Action	Mounting	Application
Most-Searched A19 Models
A19ADB-26	40–120°F	Opens on rise · MR	Remote bulb · 1.8m cap	Hot water cutout
A19AAC-9	100–240°F	SPDT	Remote bulb · 6' cap	Fluid cutout
A19ADB-2	100–240°F	Opens on rise · MR	Direct immersion · 1/2" NPT	Hot water cutout
A19BBC-2	-30–95°F	SPST · Auto reset	Coiled bulb space	Heating/cooling
A11B-1	35–45°F	SPST · Auto	4' cap · 1/8"×20' sensing	Freezestat / low-limit
A19 Series Specifications
Voltage		24 to 277 VAC (line voltage contacts)
Contact ratings		16A SPDT N.C. at 120–277 VAC; 10A SPST at 120–240 VAC
Temperature range		-30°F to 550°F (-34°C to 288°C) depending on model
Accessories		WEL14A-602R well · FTG13A-600R closed tank fitting · SHL10A sun shield

A19AAC · A19ADB · A19BBC SPST · SPDT Auto & Manual Reset -30°F to 550°F 24–277 VAC Line Voltage Remote Bulb · Strap-on · Immersion

VG7000 Series VG7000 Globe Control Valves — 2-Way & 3-Way, 1/2" to 2", Bronze/SS Trim

The Johnson Controls VG7000 Series globe control valves are the industry standard for commercial HVAC hydronic applications — hot water, chilled water, 50/50 glycol solutions, and low-pressure steam. Available in 2-way normally open, 2-way normally closed, and 3-way mixing/diverting configurations; 1/2" through 2" pipe sizes; NPT threaded, union sweat, and flanged end connections; bronze, brass trim, and stainless steel trim. Factory-coupled with VA7800 Series electric actuators (spring return and non-spring return) — the most common factory-assembled valve/actuator combination in commercial HVAC. Cv ratings from 0.46 to 47. Max 38 PSIG saturated steam; 250 PSIG close-off for hot and chilled water. Proportional (0–10V DC), on/off, and floating control.

Model Family	Size	Body	Trim	Config
VG7000 Model Number Structure
VG7 2 41	1/2"–2"	Globe	Brass	2-Way NC
VG7 2 43	1/2"–2"	Globe	Brass	2-Way NO
VG7 2 82	1/2"–2"	Globe	Brass	3-Way Mix
VG7 4 41	1/2"–2"	Globe	SS	2-Way NC
VG7 4 43	1/2"–2"	Globe	SS	2-Way NO
Key Specifications
Fluids		Hot water, chilled water, 50/50 glycol, 38 PSIG steam
Close-off pressure		Up to 250 PSIG (model-dependent)
Cv range		0.46 to 47
Actuator		VA7800 Series — spring return or non-spring return
Control		On/off, floating, proportional 0–10V DC (DIP switch configurable)

2-Way NC · 2-Way NO · 3-Way 1/2" to 2" Pipe Bronze · Brass · Stainless Trim Hot Water · Chilled Water · Steam VA7800 Actuator Compatible 0–10V · On/Off · Floating

VG1800 / VG12 Series Ball Control Valves — 2-Way & 3-Way, 1/2" to 6", Threaded & Flanged

Johnson Controls VG1800 and VG12 Series ball control valves are the high-Cv alternative to globe valves for HVAC hydronic systems — same applications (hot water, chilled water, glycol, low-pressure steam) with significantly higher flow capacity per pipe size. Available from 1/2" through 6"; 2-way and 3-way configurations; threaded NPT, solder/sweat, and ASME Class 150 flanged end connections; stainless steel ball and stem trim. Factory-coupled with M9000 Series actuators (VA9104, M9104, M9203, M9208, M9220) for spring return or non-spring return control. Used on VAV systems, fan coil units, air handling units, and large hydronic plants where globe valves create too much pressure drop.

Model	Size	Config	End	Shop
VG7882ET	1/2"	3-Way Mix · 1.8 Cv	Sweat	Shop
V11HAA-115	—	3-Way air valve · 120V	Pneumatic	Shop
VG1841CN+923BGA	1"	3-Way · 11.7 Cv · SR · On/Off	NPT	Shop
VG1841AG+943AGA	1/2"	3-Way · 4.7 Cv · 2-pos/flt SR	NPT	Shop
VG1845ADH+923GGA	1/2"	3-Way · 1.2 Cv · 24V Prop SR	NPT	Shop
VG12A5GT+94NGGA	2-1/2"	2-Way · 74 Cv · Flanged · Prop	Flanged	Shop
VG18A5PZ+92NBAC	6"	3-Way · 348 Cv · Flanged · SR	Flanged	Shop
VG18A5HU+94NGGA	3"	3-Way · 117 Cv · Flanged · Prop	Flanged	Shop
VG2831TM+92NBGC	2-1/2"	3-Way Mix · 54 Cv · M9220	Flanged	Shop
VG2831VM+92NAGC	4"	3-Way Mix · 157 Cv · Flanged SR	Flanged	Shop

1/2" to 6" Pipe 2-Way · 3-Way NPT · Sweat · Flanged Up to 348 Cv M9000 Actuator Compatible

M9000 / VA7800 Series Electric Valve & Damper Actuators — Spring Return & Non-Spring Return

Johnson Controls electric actuators are used on VG-series control valves and HVAC dampers. Spring Return (SR) actuators fail to a defined position (fully open or fully closed) on power loss — essential for freeze protection loops, smoke control dampers, and any application where a defined fail-safe position is required. Non-Spring Return (NSR) actuators hold their last position on power loss — used for general modulating control where fail-safe position is not required. VA7800 Series: direct-coupled to VG7000 globe valves, 24V, spring return or non-spring return, configurable on/off/floating/proportional via DIP switches. M9104/M9203/M9208 Series: rotary actuators for VG1800 ball valves and dampers. M9220 Series: high-torque spring return for large ball valves and dampers.

Series	Type	Control	Fail Safe	Application
VA7800 Series (VG7000 Globe Valves)
VA7810-GGA	NSR	On/Off · Floating · 0–10V	Last position	VG7000 1/2"–1-1/4" globe
VA7820-GGA	SR	On/Off · Floating · 0–10V	Spring return	VG7000 1/2"–1-1/4" globe
VA7830-GGA	NSR	On/Off · Floating · 0–10V	Last position	VG7000 1-1/2"–2" globe
VA7840-GGA	SR	On/Off · Floating · 0–10V	Spring return	VG7000 1-1/2"–2" globe
M9000 Series (Ball Valves & Dampers)
M9104-AGA-2	NSR	On/Off · Floating · Prop	Last position	VG1800 ball valve / damper
M9208-GGA-2	SR	On/Off · 24V · HVAC damper	Spring return	Damper control
M9220-BGA-2	SR	On/Off · Floating · 0–10V	Spring return	Large ball valve / damper
M9220-BGC-3	SR	Prop 0–10V or 4–20mA	Spring return	Large flanged ball valve

Spring Return · Non-Spring Return On/Off · Floating · Proportional 0–10V DC · 4–20mA 24V AC/DC Valve & Damper Applications

TE-6000 / TE-6300 Series Temperature Sensors & Sensing Elements — Duct, Pipe, Outside Air, Room

Johnson Controls TE-6000 and TE-6300 Series temperature sensors are designed for building automation and HVAC applications. They use a 1,000 Ω nickel RTD sensing element (or platinum, depending on model) — the nickel element is proven highly stable and robust for long service life. Available in duct insertion, pipe/well, outside air, strap-on surface mount, and averaging configurations. Compatible with Johnson Controls Metasys BAS, and any building automation controller that accepts 1,000 Ω nickel or 1,000 Ω platinum RTD input. The TE-6328P-1 (20-ft pipe sensor, 1,000 Ω nickel RTD, currently in stock at Memphis Control Center) is one of the most commonly ordered models.

Model	Type	Element	Length/Config	Shop
TE-6328P-1	Pipe/well	1,000 Ω Ni RTD	20 ft lead	Shop
TE-6300-603	Strap-on	1,000 Ω Ni RTD	Surface mount	Shop
TE-6310-1	Duct insertion	1,000 Ω Ni RTD	4" probe	Shop
TE-6320-1	Duct insertion	1,000 Ω Ni RTD	8" probe	Shop
TE-6100-1	Outside air	1,000 Ω Ni RTD	OAT sensor	Shop

1,000 Ω Nickel RTD Duct · Pipe · Strap-on · Outside Air Metasys Compatible HVAC & BAS Applications

P32 / P100 / Pneumatic Pressure Switches · Pneumatic Controls · Butterfly Valves · Sensors

Johnson Controls P32 Series differential air pressure switches (PENN Controls sub-brand) are used to prove airflow in HVAC air handling units — the P32AF-2C is the most widely used model (0.05–5" W.C. differential range, SPDT). P100 Series and P70 Series encapsulated pressure switches for refrigeration and HVAC (all PENN Controls). Pneumatic controls (D-series damper actuators, V-series pneumatic valves, V-4332, VB-4332 mixing valves) for legacy pneumatic building systems. VFC Series butterfly valves for large-diameter applications. CD-WAD CO₂ sensors, WEL-series bulb wells, S-series selector switches, and other building automation accessories.

Model	Description	Shop
P32AF-2C	Diff air pressure switch · 0.05–5" W.C. · SPDT · HVAC airflow proving	Shop
P100AP-332C	Encapsulated pressure control · compact · refrigeration/HVAC	Shop
V-4332-1007	1/2" flare 3-way mixing valve · 4–8 PSI spring · 1 Cv (PDTC) / 1.5 Cv (PDTO)	Shop
VB-4332-4	1/2" flare mixing valve · 1.2 Cv · pneumatic	Shop
VFC030HB+94NAGA	3" NC butterfly valve · 24V · spring return · floating actuator	Shop
V11HAA-115	3-way air valve · 120V · with integral grounding lug	Shop
CD-WAD-00-2	Wall-mount CO₂ transmitter · 0–10V DC output · display	Shop
S-2300-3	Selector switch · 3-position holding · 1-pressure switch	Shop
WEL11A-601R	Bulb well · 2-3/8"×.299" · 1/2" outside thread · brass · copper tube	Shop

P32 Diff Pressure Switches P100 Encapsulated Pressure Pneumatic Mixing Valves VFC Butterfly Valves CO₂ Sensors · Bulb Wells

A19 / PENN Controls Temperature Controller Selection Guide

The A19 Series (sold under the PENN Controls brand within Johnson Controls) covers dozens of model variants. The most common selection question is which suffix to specify. Use this guide to narrow your search, then call (901) 458-2000 to confirm the correct model for your application.

If you need...	Model family	Range	Reset	Key notes
Hot Water Temperature Control (most common for HVAC boilers)
Hot water cutout · direct immersion · auto reset	A19AAB / A19AAC	100–240°F	Auto	SPST opens on rise; AAC adds SPDT action; direct immersion 1/2" NPT or remote bulb
Hot water cutout · manual reset (safety lockout)	A19ADB	100–240°F	Manual reset	Locks out on over-temp; requires manual reset; direct immersion 1/2" NPT or remote bulb
Low-temperature range manual reset	A19ADB-26	40–120°F	Manual reset	1.8m capillary; opens on rise; common hot water low-limit
Refrigeration / Cooling Temperature Control
Low-temperature space/coil control · heating	A19BAB / A19BAC / A19BBC	-30–95°F	Auto	SPST or SPDT; coiled bulb or remote bulb; heating applications
Freezestat / low-limit freeze protection	A11B-1	35–45°F	Auto	SPST; 4' capillary with 1/8"×20' averaging element; AHU freeze protection
Warm Air / High-Temperature Applications
Warm air heating control or high-limit	A19ADN / A19ADP	100–240°F	Manual reset	Opens on rise; SPST (ADN) or SPDT (ADP); well WEL14A-602R
Crop drying / high-range process	A19AAE	80–180°F	Auto	Opens on rise; copper coil sensing element
Strap-on / Surface-Mount
Surface-mount pipe temperature control	A19DAC / A19DAB	100–240°F	Auto	SPDT; strap-on clamp; no well or immersion tapping needed
Accessories
Bulb well for remote bulb A19	WEL14A-602R	—	—	3/8"×3" copper well; fits 1/2" NPT tapping
Closed tank fitting for immersion	FTG13A-600R	—	—	For closed-system direct immersion applications
Sun shield (outdoor applications)	SHL10A-603R	—	—	Radiation shield for outdoor or sunlit locations

Not sure which A19 model you need? Call (901) 458-2000 with your application (boiler, AHU, process, refrigeration) and temperature range — we will identify the correct model. Source: Johnson Controls/PENN Controls A19 product bulletin (docs.johnsoncontrols.com).

Most-Ordered Johnson Controls Products

Browse all →

A19ADB-26PENN A19 · 40–120°F · manual reset A11B-1PENN A11 freezestat · 35–45°F TE-6328P-1Temp sensor · pipe · 1000Ω Ni · 20 ft VG7882ET1/2" 3-way ball valve · 1.8 Cv · sweat VG1841CN+923BGA1" 3-way · 11.7 Cv · SR · on/off VG1841AG+943AGA1/2" 3-way · 4.7 Cv · 2-pos/flt SR VG1845ADH+923GGA1/2" 3-way · 1.2 Cv · prop SR VG1245ADH+923BUA1/2" 2-way · 1.2 Cv · NO · 2-pos VG7243LT+72CHGA3/4" NO SS · 7.3 Cv · 24V SR prop VG7241PT+822D001-1/4" NO · 18.5 Cv · brass VG12A5GT+94NGGA2-1/2" ball · 74 Cv · flanged · prop VG18A5HU+94NGGA3" 3-way · 117 Cv · flanged · prop VG18A5PZ+92NBAC6" 3-way · 348 Cv · SR · 2-pos VG2831TM+92NBGC2-1/2" 3-way mix · 54 Cv · M9220 VG2831VM+92NAGC4" 3-way mix · 157 Cv · flanged SR VG7441ES+3801E1/2" NC · 1.9 Cv · 9–13# · bronze VG7443CT+821E011/2" 2-way · .73 Cv · 9–13# w/pos VFC030HB+94NAGA3" NC butterfly · 24V SR floating V-4332-10071/2" flare 3-way mixing valve · pneu V11HAA-1153-way air valve · 120V CD-WAD-00-2Wall CO₂ transmitter · 0–10V · display S-2300-3Selector switch · 3-position holding WEL11A-601RBulb well · 1/2" OT · brass · copper All Johnson Controls →Browse all Johnson Controls products

Home
Actuators
Johnson Controls

Compare

Show 12 24 36 48

Quick view

Compare

Johnson Controls

SKU: P599RCPS-105C

Johnson Controls P599RCPS-105C - Pressure Transducer

MSRP:

Was:

Price Now:

$150.14

1 in stock
Quick view

Compare

Johnson Controls

SKU: VG7441LT+423AGA

Johnson Controls VG7441LT+423AGA - 3/4 in 2-way Globe Control Valve with Actuator, 7.3 Cv, spring return, floating control, normally closed

MSRP:

Was:

Price Now:

$807.81

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG1841AF+923BGB

Johnson Controls VG1841AF+923BGB - 1/2 in 3-way Ball Valve with Actuator, 2.9 Cv, 24V, spring return, on/off control

MSRP:

Was:

Price Now:

$435.06

Out of Stock
Quick view

Compare

Johnson Controls

SKU: TE-631S-1

Johnson Controls TE-631S-1 - 3 in Temperature Sensor, 1,000-ohm sensing element

MSRP:

Was:

Price Now:

$37.41

Out of Stock
Quick view

Compare

Johnson Controls

SKU: A99BC-1500

Johnson Controls A99BC-1500 - Temperature Sensor, -40 to 248 F range

MSRP:

Was:

Price Now:

$380.24

8 in stock
Quick view

Compare

Johnson Controls

SKU: T9100

Johnson Controls T9100 - Thermostat

MSRP:

Was:

Price Now:

$495.22

1 in stock
Quick view

Compare

Johnson Controls

SKU: VG1845ES+910HGC

Johnson Controls VG1845ES+910HGC - 1-1/2 in 3-way Ball Valve with Actuator, 46.8 Cv, 24V, auxiliary switch

MSRP:

Was:

Price Now:

$737.34

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG12A5NY+94NBGC

Johnson Controls VG12A5NY+94NBGC - 5 in 2-way Ball Valve with Actuator, 290 Cv, 24V, spring return, on/off control

MSRP:

Was:

Price Now:

$2,506.15

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG7251CT+7153G

Johnson Controls VG7251CT+7153G - 1/2 in 2-way Globe Control Valve with Actuator, 24V, on/off control, floating control

MSRP:

Was:

Price Now:

$547.69

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG18A5GT+92NAGA

Johnson Controls VG18A5GT+92NAGA - 2-1/2 in 3-way Ball Valve with Actuator, 74 Cv, 24V, spring return, floating control

MSRP:

Was:

Price Now:

$1,834.41

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG1875AN+9A4IGA

Johnson Controls VG1875AN+9A4IGA - 1/2 in 3-way Ball Valve with Actuator, 11.7 Cv, 24V, non-spring return, on/off control

MSRP:

Was:

Price Now:

$276.99

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG1845ERH958BAC

Johnson Controls VG1845ERH958BAC - 1-1/2 in 3-way Ball Valve with Actuator, 29.2 Cv, 120V, spring return, on/off control

MSRP:

Was:

Price Now:

$749.22

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG1845CN+9A4IGA

Johnson Controls VG1845CN+9A4IGA - 1 in 3-way Ball Valve with Actuator, 11.7 Cv, 24V, non-spring return, on/off control

MSRP:

Was:

Price Now:

$405.33

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG1845AN+923BUB

Johnson Controls VG1845AN+923BUB - 1/2 in 3-way Ball Valve with Actuator, 11.7 Cv, 85-264V, spring return, on/off control

MSRP:

Was:

Price Now:

$430.43

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG1841FR+948GGA

Johnson Controls VG1841FR+948GGA - 2 in 3-way Ball Valve with Actuator, 29.2 Cv, 24V, spring return, proportional control

MSRP:

Was:

Price Now:

$955.15

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG1841AN+923GGB

Johnson Controls VG1841AN+923GGB - 1/2 in 3-way Ball Valve with Actuator, 11.7 Cv, 24V, spring return, proportional control

MSRP:

Was:

Price Now:

$536.86

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG1275CP+923GGA

Johnson Controls VG1275CP+923GGA - 1 in 2-way Ball Valve with Actuator, 18.7 Cv, spring return, normally open

MSRP:

Was:

Price Now:

$554.18

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG1245FRH948AGA

Johnson Controls VG1245FRH948AGA - 2 in 2-way Ball Valve with Actuator, 29.2 Cv, 24V, spring return, on/off control

MSRP:

Was:

Price Now:

$697.05

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG1245ADH943BUB

Johnson Controls VG1245ADH943BUB - 1/2 in 2-way Ball Valve with Actuator, 1.2 Cv, 85-264V, spring return, on/off control

MSRP:

Was:

Price Now:

$454.37

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG1241AF+943AGB

Johnson Controls VG1241AF+943AGB - 1/2 in 2-way Ball Valve with Actuator, 2.9 Cv, 24V, spring return, on/off control

MSRP:

Was:

Price Now:

$365.48

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VF-003-601

Johnson Controls VF-003-601 - mounting.BKT.FOR D3246

MSRP:

Was:

Price Now:

$231.24

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG7841GT+7152G

Johnson Controls VG7841GT+7152G - 1/2 in 3-way Globe Control Valve with Actuator, 4.6 Cv, non-spring return, proportional control

MSRP:

Was:

Price Now:

$675.22

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG2231TM+924GGA

Johnson Controls VG2231TM+924GGA - 2-1/2 in 2-way Globe Control Valve with Actuator, 51 Cv, 24V, non-spring return, proportional control

MSRP:

Was:

Price Now:

$2,648.86

Out of Stock
Quick view

Compare

Johnson Controls

SKU: VG1245AG+923BUA

Johnson Controls VG1245AG+923BUA - 1/2 in 2-way Ball Valve with Actuator, 4.7 Cv, 85-264V, on/off control, normally open

MSRP:

Was:

Price Now:

$381.01

Out of Stock

Frequently Asked Questions — Johnson Controls HVAC Controls

Common questions from mechanical engineers, building automation technicians, and HVAC contractors about Johnson Controls valves, actuators, sensors, and temperature controllers. Contact us or call (901) 458-2000 with your JCI part number.

What is Johnson Controls and what products does Memphis Control Center stock?

Johnson Controls (NYSE: JCI) is a global leader in commercial building automation, HVAC controls, security, and fire systems, founded in 1885 by Warren S. Johnson in Milwaukee, Wisconsin. Memphis Control Center stocks Johnson Controls commercial HVAC controls including A19 temperature controllers, VG7000 globe valves, VG1800/VG12 ball valves, M9000/VA7800 electric actuators, TE-6300/TE-6000 temperature sensors, P32/P100 pressure switches, pneumatic controls, butterfly valves, CO₂ sensors, and building automation accessories. Note: Johnson Controls completed the sale of its Residential and Light Commercial HVAC business (York, Coleman brands) to Bosch on August 1, 2025. The commercial building automation controls Memphis Control Center stocks are completely unaffected.

What does the Johnson Controls A19 Series temperature controller do?

The A19 Series is a mechanical line-voltage temperature controller using a liquid-filled sensing element and capillary. It actuates SPST or SPDT contacts when the sensed temperature reaches the setpoint. Available in remote bulb, strap-on, direct immersion, coiled bulb space, and averaging configurations. Temperature ranges from -30°F to 550°F depending on model. Auto reset versions return to normal when temperature recovers; manual reset (lockout) versions require a technician to reset the control after an over-temperature event — required for safety and high-limit applications. Contact ratings: 16A SPDT at 120–277 VAC. Most commonly ordered models: A19ADB-26 (40–120°F manual reset), A19ADB-2 (100–240°F manual reset, direct immersion), A19AAC-9 (100–240°F SPDT, 6' capillary).

What is the difference between VG7000 globe valves and VG1800/VG12 ball valves?

VG7000 Series (globe valves) use a linear stem and plug for flow regulation — excellent modulation linearity, available 1/2" to 2", paired with VA7800 actuators. VG1800/VG12 Series (ball valves) use a rotating ball with a bore — much higher Cv (flow capacity) for the same pipe size, lower pressure drop, available 1/2" to 6" in threaded, sweat, and ASME Class 150 flanged connections, paired with M9000 Series rotary actuators. Choose globe valves where precise modulation matters in smaller pipe sizes. Choose ball valves where low pressure drop and high flow capacity are priorities, or for pipe sizes above 2 inches.

What is the difference between spring return and non-spring return actuators?

Spring return (SR) actuators drive the valve or damper to a defined fail-safe position (fully open or fully closed) when power is lost — essential for freeze protection loops, smoke control dampers, and applications where a defined fail position is required by code. Non-spring return (NSR) actuators hold their last position on power loss — used in general modulating control where fail position is unimportant. For VA7800 Series (VG7000 valves): SR = VA7820/VA7840; NSR = VA7810/VA7830. For M9000 Series (ball valves, dampers): SR = M9203, M9208, M9220; NSR = M9104, M9300. All configure for on/off, floating, or proportional (0–10V DC) control via DIP switches.

What systems are Johnson Controls TE-6300 sensors compatible with?

The TE-6300 Series uses a 1,000 Ω nickel RTD sensing element — stable, robust, and long-life. Available in duct insertion, pipe/well mount, strap-on, and outside air configurations. Fully compatible with the Johnson Controls Metasys BAS and any building automation controller, thermostat, or transmitter that accepts a 1,000 Ω nickel RTD input. The TE-6328P-1 (pipe/well mount, 20-foot lead) is one of the most commonly ordered. Call (901) 458-2000 with your controller model to confirm compatibility.

Does Johnson Controls still make HVAC equipment after the Bosch sale?

Johnson Controls completed the sale of its Residential and Light Commercial HVAC business (York, Coleman, and Hitachi joint venture brands) to Bosch on August 1, 2025 for $8.1 billion. Those product lines are now part of Bosch. However, Johnson Controls commercial building automation and HVAC controls are completely unaffected — the VG-series valves, M9000 and VA7800 actuators, A19 temperature controllers, TE-6300 sensors, P32 pressure switches, and Metasys BAS platform remain Johnson Controls products. JCI continues as a public company (NYSE: JCI) focused on commercial building solutions.

How do I read a Johnson Controls valve model number?

For VG7000 globe valves: VG7 = globe series; next digits encode size and Cv; trim letter (E = stainless, T = brass); end connection letter (T = NPT, S = sweat). For VG1800/VG12 ball valves: VG18 = 1800-series ball body; digits encode size and Cv; the + separator divides valve body from actuator (e.g. VG1841CN+923BGA = 1" 3-way ball valve body + 923BGA spring return proportional actuator). The full assembly is ordered as a single part number. Call (901) 458-2000 with your nameplate model number and we will decode it and confirm availability.

What is PENN Controls and how does it relate to Johnson Controls?

PENN Controls is a sub-brand of Johnson Controls. The A19 Series temperature controllers, P70 series pressure controls, P32 differential pressure switches, P100 encapsulated pressure switches, A28 two-stage temperature controls, and A350 electronic controls are all documented and sold under the PENN Controls brand within the Johnson Controls portfolio — you will see both "Johnson Controls" and "PENN Controls" on packaging and technical documentation. If you are searching for a "Penn A19," "Penn P70," or "Penn Controls" part, you are looking for a Johnson Controls product. Memphis Control Center stocks the full A19/PENN Controls line — call (901) 458-2000 with your model number. Source: docs.johnsoncontrols.com/bas/r/PENN-Controls (Johnson Controls own documentation portal).

Need a Johnson Controls Part?

Call us with your JCI part number — A19 controller, VG valve, M9000 actuator, TE sensor, or any other Johnson Controls product. Same-day shipping on stocked parts from Memphis, TN.

Call (901) 458-2000 Browse All 8,011 JCI Products Contact Us

For emergencies, outside of business hours, call #901-604-7069