Boiler Controls

(Showing 24 of 2831)
2,800+ Products In Stock — Ships Today

Boiler Controls, Low Water Cutoffs & Steam Traps for
Commercial & Industrial Heating Systems

Shop 2,800+ boiler controls including low water cutoffs, level controls, water feeders, pump controllers, steam traps, and boiler replacement parts. We stock McDonnell & Miller, Hydrolevel, Hoffman Specialty, and Warrick-Gems — authorized distributor with free same-day shipping from Memphis, TN. Stocking current and legacy models since 1967.

Authorized Distributor Free Same-Day Shipping Legacy & Current Models Stocked Genuine OEM Parts Only
Safety FirstLWCO & safety controls that protect steam & hot water boilers
2,800+ ProductsDeepest boiler controls inventory in the mid-South
Legacy Parts StockedSeries 63, 64, 67, 150, 157 & hard-to-find replacements
Same-Day ShippingOrders by 2 PM CT ship same day — always free

Boiler Control Brands We Stock

We are an authorized distributor for all four major boiler control brands — stocked deep on both current and legacy models. Find your brand below or call our team if you need help finding the right part.

McDonnell & Miller
Low Water Cutoffs, Pump Controllers & Water Feeders

McDonnell & Miller (a Xylem brand) is the most trusted name in boiler safety controls. We stock the full LWCO line including the Series 150S, 157S, 67, 64, 63, 42, 93, 193, and 194 for both steam and hot water boilers. Also stocking M&M water feeders, combination controls, pump controllers, and flow switches — plus replacement gaskets, floats, and repair parts for legacy models.

Series 150S LWCOSeries 157SSeries 67 & 64Water FeedersPump ControllersRepair Parts
Hydrolevel
Electronic Low Water Cutoffs & Boiler Safety Controls

Hydrolevel electronic low water cutoffs use probe-type conductance sensing with no moving parts — making them a popular upgrade over float-type LWCO on commercial steam and hot water boilers. We stock the CG400, HydroStat 3000, VXT series, and Hydrolevel combination controls for both new installations and retrofit applications.

Hydrolevel controls meet ASME CSD-1 requirements and are frequently specified for commercial boiler room upgrades where reliability and reduced maintenance are priorities.

CG400HydroStat 3000VXT SeriesElectronic LWCOASME CSD-1
Hoffman Specialty
Steam Traps, Air Vents & Boiler Accessories — 1,400+ Products

Hoffman Specialty is our largest boiler controls category with 1,400+ products. Their line covers float & thermostatic steam traps (F&T), inverted bucket traps, thermodynamic traps, radiator air vents, main air vents, condensate pumps, and a comprehensive range of boiler room accessories and fittings.

Whether maintaining a residential steam boiler or a large commercial steam distribution system, Hoffman has the components. We stock both current catalog and hard-to-find legacy Hoffman parts.

F&T Steam TrapsInverted BucketRadiator Air VentsMain Air VentsCondensate Pumps
Warrick-Gems
Conductance Level Controls & Boiler Feedwater Sensing

Warrick-Gems conductance-type level controls are widely used in boiler feedwater systems, condensate receivers, and deaerators. Their Series 16, 26, DFC dual-function controls, and relay panels provide precise high and low-level switching for pump control and low-water cutoff applications.

Warrick controls are a common OEM fit on commercial boiler feedwater packages and are frequently replaced on aging systems — we keep replacement relays, probes, and complete assemblies in stock.

Series 16 & 26DFC Dual FunctionRelay PanelsFeedwater SystemsReplacement Probes

Boiler Control Types We Stock

From low water cutoffs to steam traps — we cover every component in the boiler room. Not sure what you need? Call our team — we've been specifying boiler room parts since 1967.

Low Water Cutoffs

Float-type and electronic LWCO for steam and hot water boilers — manual and automatic reset. Series 63, 64, 67, 150S, 157S and more.

Water Feeders

Float-operated water feeders that automatically maintain boiler water level. Series 47, 51, 53, 101-A, 247, and combination feeder/cutoff units.

Pump Controllers

Boiler feedwater pump controllers with float or probe-type level sensing for automatic pump start/stop. M&M Series 193 and 194.

Steam Traps

Float & thermostatic (F&T), inverted bucket, thermodynamic, and balanced pressure steam traps for steam heating distribution systems.

Air Vents & Radiator Vents

Radiator air vents, main line vents, and thermostatic air eliminators for one-pipe and two-pipe steam heating systems.

Conductance Level Controls

Probe-type electronic level sensing for feedwater tanks, condensate receivers, deaerators, and cooling towers. Warrick Series 16, 26, DFC.

Boiler Controls: Essential Components for Efficient Heating

Compare
Show 12 24 36 48 96
  • McDonnell & Miller 114400 FS4-3 – 1" NPT General Purpose Paddle Flow Switch

    McDonnell & Miller

    SKU: 114400

    114400

    $199.99
    18 in stock
  • McDonnell & Miller 194 (166600) Pump Controller

    McDonnell & Miller

    SKU: 166600

    166600

    $2,616.26
    1 in stock
  • Warrick-Gems Sensors & Controls DFC1C0 Dual Function Level Control is a versatile and reliable solution for fluid level monitoring and control. Designed for 120V operation, this screw-mounted unit features dual functionality for both high and low-level detection in various industrial applications. Built to handle demanding environments, the DFC1C0 ensures accurate and efficient level control, making it an ideal choice for applications in water treatment, tanks, and other fluid management systems. Its durable construction and easy installation make it a top choice for effective level sensing and system control.

    Warrick-Gems Sensors & Controls

    SKU: DFC1C0

    DFC1C0

    $504.00
    2 in stock
  • Warrick-Gems Sensors & Controls 16DMM1B0 liquid level control, 26,000 ohm inverse acting mode, 120Vac supply voltage. Features a DPDT relay (2 Normally Open/2 Normally Closed), DIN mount style, general-purpose plug-in module with no enclosure and screw connector socket

    Warrick-Gems Sensors & Controls

    SKU: 16DMM1B0

    16DMM1B0

    $702.46
    1 in stock
  • Warrick-Gems Sensors & Controls 16DMC1B0 liquid level control, 26,000 ohm direct acting mode, 120Vac supply voltage. Features a DPDT relay (2 Normally Open/2 Normally Closed), DIN mount style, general-purpose plug-in module with no enclosure and screw connector socket

    Warrick-Gems Sensors & Controls

    SKU: 16DMC1B0

    16DMC1B0

    $749.43
    5 in stock
  • Warrick-Gems Sensors & Controls 3E1B Liquid Level Accessory - General Purpose Top Mounting Fixture with Red Brass Body, Epoxy Coated Die-Cast Aluminum Terminal Housing, and One Electrode Probe Fitting. Features 1" NPT tank connection and 1/2" NPT conduit connection for reliable liquid level monitoring

    Warrick-Gems Sensors & Controls

    SKU: 3E1B

    3E1B

    $480.07
    11 in stock
  • Warrick-Gems Sensors & Controls 26B1C0F is a liquid level control featuring a 10,000-ohm direct acting mode of operation and a 120Vac supply voltage. It includes an SPDT relay with one normally open and one normally closed contact, screw mount standoff style, and a low water cutoff control board without an enclosure. This control offers a built-in 3-second time delay, manual reset with power outage feature, remote mount normally closed pushbutton, and spade terminals for easy installation

    Warrick-Gems Sensors & Controls

    SKU: 26B1C0F

    26B1C0F

    $443.25
    1 in stock
  • Warrick-Gems Sensors & Controls 26MB1A0 Liquid Level Control - Features a 10,000 ohm direct acting mode of operation with a 120Vac supply voltage. Includes an SPDT relay with 1 normally open and 1 normally closed contact, 11-pin octal socket style, and a low water cutoff plug-in module. No enclosure with a screw connector socket for easy installation and reliable liquid level control in industrial systems.

    Warrick-Gems Sensors & Controls

    SKU: 26MB1A0

    26MB1A0

    $585.41
    3 in stock
  • Warrick-Gems Sensors & Controls 26B1A0A Liquid Level Control is designed for reliable liquid level detection and control in various applications. Featuring a 10,000 ohm direct acting mode of operation and a 120Vac supply voltage, this control unit includes an SPDT relay with one normally open and one normally closed contact. The unit is designed with a 1/16" panel standoff style and offers a low water cutoff control board without an enclosure. It also includes a built-in 3-second time delay, manual reset with a power outage feature, and a remote mount normally closed pushbutton. Additionally, the 26B1A0A has a test feature and spade terminals for easy installation and operation, making it ideal for ensuring safe and effective liquid level management in industrial and commercial systems.

    Warrick-Gems Sensors & Controls

    SKU: 26B1A0A

    26B1A0A

    $551.81
    5 in stock
  • Warrick-Gems Sensors & Controls 26NMC1B0 Liquid Level Control, featuring 26,000-ohm direct acting mode of operation, 120Vac supply voltage, SPDT relay (1 normally open/1 normally closed), 11-pin DIN mount style, low water cutoff plug-in module with screw connector socket, and no enclosure for versatile industrial applications

    Warrick-Gems Sensors & Controls

    SKU: 26NMC1B0

    26NMC1B0

    $611.90
    10 in stock
  • Warrick-Gems Sensors & Controls 3E1A Liquid Level Accessory, featuring a general-purpose top mounting fixture. Designed with a durable cast iron body and an epoxy-coated die-cast aluminum terminal housing, it includes one electrode probe fitting. Equipped with a 1" NPT tank connection and a 1/2" NPT conduit connection, this accessory ensures reliable liquid level monitoring in various industrial applications.

    Warrick-Gems Sensors & Controls

    SKU: 3E1A

    3E1A

    $363.78
    6 in stock
  • Warrick-Gems Sensors & Controls 26C1B0E Liquid Level Control is a reliable solution for precise water level management in various industrial applications. Operating with a 26,000 ohm resistance in direct acting mode, this control features a 120Vac supply voltage and an SPDT relay (1 Normally Open/1 Normally Closed). Its 1/8" panel standoff style allows for easy integration into control panels. Designed with low water cutoff control, a built-in 3-second time delay, and manual reset with a power outage feature, the 26C1B0E ensures optimal performance and safety. Spade terminals make installation simple and efficient, ideal for applications requiring accurate liquid level regulation and protection.

    Warrick-Gems Sensors & Controls

    SKU: 26C1B0E

    26C1B0E

    $430.35
    14 in stock
  • Xylem-Hoffman Specialty 401485 78 water vent, designed for efficient air removal in fluid systems. With a 3/4" connection and a maximum pressure rating of 150#, this durable vent valve ensures optimal system performance by preventing air buildup and maintaining smooth water flow. Ideal for use in heating, cooling, and water distribution systems, the 401485 water vent provides reliable operation and long-lasting durability

    Hoffman

    SKU: 401485

    401485

    $277.13
    1 in stock
  • Xylem-Hoffman Specialty 401434 75 Steam Vent, featuring a 1/2" female and 3/4" male connection with a 3# pressure rating. This high-quality steam vent is designed for efficient steam release in industrial applications, ensuring reliable performance and safety in steam systems

    Hoffman

    SKU: 401434

    401434

    $176.02
    1 in stock

Can't find the part you need?

We stock legacy and current models — if it exists, we can source it. Our team has been finding hard-to-find boiler parts since 1967.

Frequently Asked Questions

What boiler control brands does Memphis Control Center stock?
We stock boiler controls from McDonnell & Miller (Series 150S, 157S, 67, 64, 63, 193, 194), Hydrolevel (CG400, HydroStat 3000, VXT series), Hoffman Specialty (steam traps, air vents, boiler accessories), and Warrick-Gems (Series 16, 26, DFC dual-function controls). Over 2,800 products with free same-day shipping from Memphis, TN.
What is a low water cutoff and why does my boiler need one?
A low water cutoff (LWCO) is a required safety device that shuts down a boiler's burner when water drops below a safe operating level, preventing overheating, boiler damage, and potential explosion. ASME, NFPA 85, and most local codes require LWCO devices on commercial and industrial steam and hot water boilers. McDonnell & Miller and Hydrolevel are the most widely specified brands.
What is the difference between the McDonnell & Miller 150S and 157S?
The McDonnell & Miller 150S is a low water cutoff only. The 157S is a combination low water cutoff and pump controller in one unit — it adds pump control functionality so a single device handles both LWCO protection and boiler feedwater pump cycling. The 157S is the most common choice when adding pump control to an existing steam boiler.
What is the difference between a float-type and electronic low water cutoff?
Float-type LWCOs (McDonnell & Miller 150S, 157S, 67) use a mechanical float assembly to sense water level — reliable and time-tested but require periodic float chamber maintenance. Electronic LWCOs (Hydrolevel CG400, HydroStat 3000) use probe-type conductance sensing with no moving parts — offering greater reliability, easier maintenance, and built-in self-diagnostics. Electronic models are increasingly specified for commercial boiler room upgrades.
Do you stock hard-to-find and legacy boiler control parts?
Yes. Memphis Control Center maintains deep inventory on both current and legacy models from all four brands. We stock replacement gaskets, floats, switches, and repair parts for McDonnell & Miller Series 63, 64, 67, 150, and 157 going back decades. Call us at (901) 458-2000 — if a part exists, we can source it.
Do you ship boiler controls same-day?
Yes. In-stock boiler controls ship same-day on orders placed by 2 PM CT with free ground shipping nationwide from Memphis, TN.

For emergencies, outside of business hours, call #901-604-7069