-
$6.96
-
$8.31
Memphis Control Center is an authorized distributor of Crown Engineering ignition products — one of the largest manufacturers of electrodes, flame rods, and probes for oil and gas fired equipment in the industry. CA Series igniters and flame rods are direct Crown-manufactured replacements for Auburn, Maxon, Eclipse, and USI parts. FRS Series and Auburn flame rods for industrial burner flame sensing. Champion spark plugs (J99, F-121501) for industrial ignition. WCC-1138-L Auburn liquid level electrodes. 58RL12 RedLine gauge glass (5/8"×12"). 41661 high-voltage silicone ignition wire (7mm, sold per foot — ). Crown Engineering products are used in Beckett, Wayne, Carlin, Midco, Powerflame, Gordon Piatt, Maxon, Eclipse, Fulton, and Kewanee burners and boilers. Family-owned and operating since 1950 in Farmingdale, New Jersey. Family-owned, serving Memphis since 1967.
These are the most commonly ordered Crown Engineering products at Memphis Control Center — all stocked and ready to ship same day. Cross-references to Auburn, Maxon, Eclipse, and USI parts are listed where applicable. Contact us if you need a part not listed or need to cross-reference a number we don't have on the site.
Crown Engineering's CA Series are Crown-manufactured direct replacement igniters for Auburn, Maxon, Eclipse, and USI industrial burner igniters. These are not third-party copies — Crown Engineering manufactures these parts to specification as the replacement for the OEM parts listed. Used in commercial and industrial gas burners, oil burners, boilers, and process equipment.
| Crown Part | Replaces | Shop |
|---|---|---|
| CA100 | Auburn I-2 / USI R6042 | Shop |
| CA141 | Auburn I-6-6 (6" tip igniter) | Shop |
| CA232 | Eclipse 12568 / Auburn I-25-4 | Shop |
| CA330 | Auburn IP-19 / Maxon 25663 | Shop |
| CA471 | Eclipse 13047-1 / USI P-5035 | Shop |
Flame rods (flame sensing rods / flame sensors) detect the presence of a flame in a burner by conducting a small ionization current through the flame to ground. They are safety-critical components — if the flame rod fails or is fouled, the burner control board sees no flame confirmation and shuts the burner down on lockout. Crown Engineering manufactures CA Series flame rods as direct replacements for Auburn and Maxon OEM flame rods, and also supplies Auburn FRS Series flame rods.
| Crown Part | Replaces / Description | Shop |
|---|---|---|
| CA432-1 | Maxon 59174 | Shop |
| CA434 | Auburn FRS-4-6 / Maxon 22427 | Shop |
| FRS-4-6 | Auburn FRS-4-6 (6" rod, 1/4"-18 NPT, 5/8" hex, Kanthal, 2350°F) | Shop |
Crown Engineering supplies Champion industrial spark plugs for industrial burner ignition applications including oil burners, waste oil burners, pressure washers, grain dryers, and agricultural equipment. Also stocks Auburn industrial igniters. These are not automotive spark plugs — they are designed specifically for continuous industrial combustion duty.
| Part | Description | Shop |
|---|---|---|
| J99 | Champion spark plug — industrial ignition | Shop |
| F-121501 | Champion igniter | Shop |
| I-31-1 | Auburn igniter (replaces Maxon 23739 / Eclipse 16927) | Shop |
| 21705 | Gordon Piatt CG 86 / 210330-0003 electrode | Shop |
Crown Engineering's "Single Source" philosophy extends well beyond igniters — the product line includes everything a burner/boiler technician needs on a service call. Gauge glass, high-voltage ignition wire, liquid level electrodes, connectors, and specialty tools.
| Part | Description | Shop |
|---|---|---|
| 58RL12 | RedLine gauge glass, 5/8" OD × 12" length | Shop |
| 58RL12-12 | RedLine gauge glass, 5/8" OD × 12", 12-pack | Shop |
| 41661 | 7mm red silicone HV wire, 18 AWG, 482°F max — sold per foot | Shop |
| WCC-1138-L | Auburn liquid level electrode, 3/8" NPT dry seal | Shop |
| 40420 | Squeeze-n-Pop gauge glass cutter tool | Shop |
Use this table to find the Crown Engineering part number for your Auburn, Maxon, Eclipse, or USI igniter or flame rod. Crown CA Series parts are Crown-manufactured to replace the OEM parts listed — not generic equivalents. Contact us if you don't see your part number here.
| Crown Part | Type | OEM Cross-Reference | Application | Shop |
|---|---|---|---|---|
| CA100 | Igniter | Auburn I-2 · USI R6042 | Gas/oil burners | Shop |
| CA141 | Igniter | Auburn I-6-6 (6" tip) | Gas/oil burners | Shop |
| CA200 | Igniter | Westwood I-18 | Oil burners | Shop |
| CA232 | Igniter | Eclipse 12568 · Auburn I-25-4 | Gas burners | Shop |
| CA330 | Igniter | Auburn IP-19 · Maxon 25663 | Gas burners | Shop |
| CA341 | Igniter | Maxon 47232 | Gas burners | Shop |
| CA415 | Igniter | Maxon 43079 | Gas burners | Shop |
| CA430 | Flame Rod | Maxon 47743 | Gas burner flame sensing | Shop |
| CA432-1 | Flame Rod | Maxon 59174 | Gas burner flame sensing | Shop |
| CA434 | Flame Rod | Auburn FRS-4-6 · Maxon 22427 | Gas burner flame sensing | Shop |
| CA471 | Igniter | Eclipse 13047-1 · USI P-5035 | Gas burners | Shop |
| CA635 | Igniter | Auburn I-10-25 · Eclipse 18460 | Gas burners | Shop |
| FRS-4-6 | Flame Rod | Auburn FRS-4-6 / Eclipse 13093 (6" · 1/4"-18 NPT · 5/8" hex · Kanthal · 2350°F) | Industrial burner sensing | Shop |
| I-31-1 | Igniter | Auburn I-31-1 · Maxon 23739 · Eclipse 16927 | Industrial gas burners | Shop |
| WCC-1138-L | Liquid Level | Auburn WCC-1138 (3/8" NPT dry seal) | Liquid level sensing/control | Shop |
| J99 | Spark Plug | Champion J99 — industrial ignition | Oil burners · industrial | Shop |
| F-121501 | Igniter | Champion F-121501 | Industrial ignition | Shop |
| 21705 | Electrode | Gordon Piatt CG 86 / 210330-0003 | Boiler electrodes | Shop |
| 41661 | HV Wire | 7mm red silicone · 18 AWG · 482°F max · sold per foot | Electrode-to-transformer wiring | Shop |
| 58RL12 | Gauge Glass | 5/8" OD × 12" RedLine boiler glass | Boiler water level gauges | Shop |
| 40420 | Tool | Squeeze-n-Pop gauge glass cutter | Gauge glass service | Shop |
Can't find your part? Contact us or call (901) 458-2000 with your OEM part number — we can look up the Crown cross-reference.
Memphis Control Center stocks Crown Engineering parts cross-referenced to Westwood electrode numbers (E5-xxx format) for Beckett, Carlin, Wayne, Auburn, Gordon Piatt, Eclipse, Power Flame, Fulton Boiler, and Kewanee burner and boiler electrode part numbers. All data from Crown Engineering's official Westwood Cross-Reference (revised May 2016 — 1,994 confirmed matches). Contact us with your Westwood or OEM part number and we'll confirm the Crown equivalent.
Legend: E5-xxx = Westwood (new format) · INS = insulator only · Entries marked CLOSE/UK/NLA in the original xref are excluded here — only confirmed matches shown
| Westwood # | OEM Burner Brand | Crown Part # | Description | Shop |
|---|---|---|---|---|
| Standard Electrode Types | ||||
| E5-1M4 / 1M4 | Westwood | 01040 | Type 1M Electrode, 4" | Shop |
| E5-1M6 / 1M6 | Westwood | 01060 | Type 1M Electrode, 6" | Shop |
| E5-2F5 / 2F5 | Westwood | 06050 | Type 2F Electrode, 5" | Shop |
| E5-2F6 / 2F6 | Westwood | 06060 | Type 2F Electrode, 6" | Shop |
| E5-2M5 / 2M5 | Westwood | 05050 | Type 2M Electrode, 5" | Shop |
| E5-3F5 / 3F5 | Westwood | 03050 | Type 3F Electrode, 5" | Shop |
| E5-3M5 / 3M5 | Westwood | 02050 | Type 3M Electrode, 5" | Shop |
| E5-4M5 / 4M5 | Westwood | 04050 | Type 4M Electrode, 5" | Shop |
| Auburn | ||||
| E5-I-2 | Auburn | CA100 | Auburn I-2 igniter | Shop |
| E5-IP-19 | Auburn | CA330 | Auburn IP-19 igniter | Shop |
| E5-I-10-25 | Auburn | CA635 | Auburn I-10-25 igniter | Shop |
| E5-FRS-4-6 | Auburn | FRS-4-6 | Auburn flame rod 6" · 1/4"-18 NPT · 2350°F | Shop |
| E5-FRS-2-6 | Auburn | FRS-2-6 | Auburn flame rod, 6" | Shop |
| E5-FRS-2-12 | Auburn | FRS-2-12 / CA391 | Auburn flame rod, 12" | Shop |
| Beckett (73 total in xref) | ||||
| E5-151 | Beckett | 20425 | Beckett Electrode | Shop |
| E5-151B | Beckett | 20420 | Beckett Electrode | Shop |
| E5-151D | Beckett | 20404 | Beckett Electrode | Shop |
| E5-151E | Beckett | 20410 | Beckett AF Electrode | Shop |
| E5-151G | Beckett | 20441 | Beckett Electrode | Shop |
| E5-151K | Beckett | 20416 | Beckett Electrode | Shop |
| E5-151M | Beckett | 20405 | Beckett Electrode | Shop |
| E5-151S | Beckett | 20412 | Beckett Electrode | Shop |
| E5-151U | Beckett | 20414 | Beckett Electrode | Shop |
| E5-151V | Beckett | 20437 | Beckett Electrode | Shop |
| Carlin (68 total in xref) | ||||
| E5-184 | Carlin | 20715 | Carlin Electrode | Shop |
| E5-185 | Carlin | 20725 | Carlin Electrode | Shop |
| E5-185A | Carlin | 20760 | Carlin Electrode | Shop |
| E5-186 | Carlin | 20745 | Carlin Electrode | Shop |
| Wayne (51 total in xref) | ||||
| E5-601B | Wayne | 28042 | Wayne Electrode | Shop |
| E5-603 | Wayne | 28028 | Wayne Electrode | Shop |
| E5-604 | Wayne | 28022 | Wayne Electrode | Shop |
| E5-604B | Wayne | 28048 | Wayne Electrode | Shop |
| Gordon Piatt (34 total in xref) | ||||
| E5-307B (CG 86) | Gordon Piatt | 21705 | Gordon Piatt CG 86 / 210330-0003 | Shop |
| E5-307C | Gordon Piatt | 21689 | Gordon Piatt Electrode | Shop |
| E5-307D | Gordon Piatt | 21690 | Gordon Piatt Electrode | Shop |
| E5-307F | Gordon Piatt | 21692 | Gordon Piatt Electrode | Shop |
| Eclipse (12 total in xref) | ||||
| E5-235 | Eclipse | 21300 | Eclipse Electrode | Shop |
| E5-235A | Eclipse | 21304 | Eclipse Electrode | Shop |
| E5-235B | Eclipse | 21306 | Eclipse Electrode | Shop |
| E5-236 | Eclipse | 21308 | Eclipse Electrode | Shop |
| E5-238B | Eclipse | 21325 | Eclipse Electrode | Shop |
| Power Flame (47 total in xref) | ||||
| E5-475 | Power Flame | 26875 | Power Flame Electrode | Shop |
| E5-475A | Power Flame | 26890 | Power Flame Electrode | Shop |
| E5-475B | Power Flame | 26894 | Power Flame Electrode | Shop |
| E5-477 | Power Flame | 26878 | Power Flame Electrode | Shop |
| E5-477A | Power Flame | 26990 | Power Flame Electrode | Shop |
| Fulton Boiler (10 total in xref) | ||||
| E5-282 | Fulton Boiler | 21559 | Fulton Boiler Electrode | Shop |
| E5-282A | Fulton Boiler | 21555 | Fulton Boiler Electrode | Shop |
| Kewanee (10 total in xref) | ||||
| E5-378 | Kewanee | 21672 | Kewanee Electrode | Shop |
| E5-378A | Kewanee | 22315 | Kewanee Electrode | Shop |
| E5-378B | Kewanee | 22305 | Kewanee Electrode | Shop |
| E5-378C | Kewanee | 22300 | Kewanee Electrode | Shop |
Source: Crown Engineering Corporation Westwood Cross-Reference, revised May 2016. 1,994 confirmed matches. Don't see your number? Contact us or call (901) 458-2000.
Common questions about Crown Engineering igniters, flame rods, electrodes, and cross-references. Contact us or call (901) 458-2000 — we've been servicing the combustion industry since 1967.
What is the difference between a Crown CA Series part and the original Auburn or Maxon part?
Crown Engineering manufactures CA Series igniters and flame rods as direct replacements for Auburn, Maxon, Eclipse, and USI OEM parts. They are Crown-built to fit and function identically to the OEM — not generic third-party copies. Crown Engineering has been one of the largest manufacturers of electrodes and flame rods for oil and gas fired equipment since 1950, and many of the OEM cross-references are parts Crown has manufactured for decades. When you order a CA Series part, you are getting a Crown-manufactured part built to replace the specific OEM part number listed.
What is a flame rod and why does my burner need one?
A flame rod (also called a flame sensing electrode or flame sensor) is a metal probe that detects the presence of a flame by conducting a small ionization current through the flame to ground. When a flame is present, the control board reads this current as proof of flame and allows the burner to continue running. If the flame rod fails, is fouled with carbon deposits, is cracked, or is bent out of position, the control board sees no flame signal and goes to lockout — even if the burner is actually firing. Common failure signs: nuisance lockouts, lockout immediately after ignition, or intermittent lockouts during the heating season. Flame rods are wear items and should be inspected and replaced during annual burner service.
What is the difference between an igniter and an electrode?
In most contexts these are used interchangeably for the component that creates a spark to ignite the fuel-air mixture. Technically: an electrode is the conductive tip that carries the high-voltage spark. An igniter is the complete assembly — electrode, ceramic insulator, and mounting hardware — that connects to the ignition transformer. A flame rod is different — it does not spark. It only senses the presence of a flame after ignition via ionization current. Some burners use a combination igniter/flame rod that both sparks to ignite and then senses the flame; others use separate igniter and flame rod components.
What burners and equipment use Crown Engineering products?
From Crown Engineering's own documentation: Beckett AFII oil burners, Wayne Blue Angel oil burners, Carlin Elite oil burners, Midco power gas burners, Wayne power gas burners, Fulton boilers, Kewanee boilers, waste oil burners, grain drying equipment, hot water heaters, pressure washers, diesel truck heaters, baking ovens, agricultural equipment, and oil & gas flares. If you are servicing commercial or industrial oil or gas fired equipment, there is a very strong chance Crown Engineering makes the electrode or igniter for it. Call us at (901) 458-2000 with your burner make and model.
What is Crown Engineering 41661 ignition wire used for?
Crown Engineering 41661 is a 7mm diameter red silicone high-voltage ignition cable for electrode-to-transformer wiring in oil and gas burners, sold by the foot at Memphis Control Center. Specs: 7mm OD, 18 AWG stranded conductor, 0.113" insulation thickness, maximum temperature 482°F (250°C). It is used to fabricate or replace the high-voltage lead wire that connects the ignition transformer to the igniter electrode. Silicone insulation is specified for burner applications because it withstands the high temperatures far better than standard PVC wire (which is typically rated only to 266°F). The 7mm OD accommodates standard Rajah-style ignition terminals and fits standard electrode adapter boots. Cut to the length you need — available by the foot.
For emergencies, outside of business hours, call #901-604-7069
