Description
Honeywell M9184C1031 Modutrol IV Series 90 Motor The Honeywell M9184C1031 is a 24 VAC Modutrol IV Series 90 proportional motor designed to position dampers and valves in commercial HVAC, boiler, burner and industrial control applications. The M9184C1031 uses a 135-ohm Series 90 proportional control signal, provides 150 lb-in of torque, and features non-spring return operation with two factory-installed internal auxiliary switches. M9184C1031 Specifications Manufacturer: Honeywell Model: M9184C1031 Series: Modutrol IV / Series 90 Product Type: Proportional Damper & Valve Actuator Supply Voltage: 24 VAC Frequency: 50/60 Hz Control Signal: 135 Ohm Proportional Torque: 150 lb-in Torque: 17 Nm Fail-Safe Mode: Non-Spring Return Internal Auxiliary Switches: 2 Stroke: Adjustable 90° to 160° Factory Stroke Setting: 90° Nominal Timing: 30–60 Seconds Mounting: Foot Mounted Shaft: Dual-Ended Shaft Size: 0.375" Square Electrical Connections: Quick-Connect Terminals Shaft Rotation on Increasing Signal: Clockwise Ambient Temperature Range: -40°F to 150°F Weather Protection: NEMA 3 when mounted upright 135-Ohm Series 90 Proportional Control The Honeywell M9184C1031 is designed for controllers that provide a Series 90 135-ohm proportional output. The actuator modulates its shaft position in response to the control signal, allowing precise positioning of compatible dampers and valves. 150 lb-in Torque The M9184C1031 provides 150 lb-in of torque, making it suitable for larger dampers, valves and other commercial or industrial control applications requiring higher actuator torque. Non-Spring Return Operation The M9184C1031 is a non-spring return actuator. Unlike a spring-return motor, it does not automatically drive to a predetermined fail-safe position when power is removed. Always confirm the required fail-position behavior before replacing an existing actuator. Two Internal Auxiliary Switches This model includes two factory-installed adjustable auxiliary switches. These switches can be used for functions such as: Equipment interlocks Position indication Alarms Burner sequencing Auxiliary control circuits Adjustable Stroke The M9184C1031 has a field-adjustable stroke from 90° to 160°, with a factory setting of 90°. This allows the motor travel to be matched to the requirements of the connected valve or damper. Typical Applications The Honeywell M9184C1031 is commonly used to position: HVAC dampers Combustion-air dampers Control valves Boiler controls Burner systems Air-handling equipment Industrial process-control equipment M9184C1031 vs. M9184A1019 Both models are 24V Modutrol IV Series 90 motors with 150 lb-in torque and 135-ohm proportional control. The key difference is auxiliary switches: M9184C1031 2 internal auxiliary switches M9184A1019 1 internal auxiliary switch Always verify auxiliary-switch requirements before substituting one model for another. Does M9184C1031 Replace CB 894-3481? The Honeywell M9184C1031 is commonly cross-referenced as a replacement for CB 894-3481. Verify shaft, linkage, voltage, control signal and application requirements before replacing a legacy actuator. Need Help Selecting a Modutrol IV Motor? Memphis Control Center stocks Honeywell Modutrol IV motors including M9184, M7284, M9484, M4185 and related actuator models. Contact Memphis Control with your existing model number, control signal, voltage and torque requirement if you need help identifying the correct replacement.
